Garage Door Springs – Protect Your Family and Home
Garage doors are very common, but they can be very dangerous if they break. Most garage door springs are tensioned by a drum, which is mounted on the top of the garage door. Extension spring systems are usually mounted on the side of the garage door, just above the garage door opener. When the door is opened, they stretch and then contract using pulleys and cables.
Torsion springs are commonly used for garage door springs because of their ease of installation. Generally, torsion springs are wound using a few teeth and a bolt that fits tightly into each tooth. This bolt can be wound tightly on both sides of the garage door so that when the garage door springs are stretched they exert similar pressure to each other. Hydraulic extension spring systems usually uses one or even two (usually) tightly wound springs installed on both sides of the drum. This system increases the tension of the springs because when they are closed the drum does not move when the garage door springs are open.
The most expensive garage door springs are the extension spring systems because they require custom wound wire, which increases the cost. They also tend to last longer than the other systems, which is why they are more commonly used. The springs installed on your garage door opening may have to be replaced every couple of years due to the wear and tear of your garage door opening, which can put a strain on the springs. The best way to go about replacing your garage door springs is to contact garage door repair near you and get them to come out and inspect your system.
There are different types of garage door springs that need to be replaced based upon how the garage door springs are wound. There are different types of springs available based upon how they are wound and what part of the spring goes where depending on whether it is an extension spring or torsion spring. You will need to know exactly what type of garage door spring that you have before you choose to replace the springs. Most people do not know how the springs are wound, which leads to having to replace the springs more often, which can cause more damage to the system.
If you need to replace your garage door springs and you do not know which type you have you should look for the manufacturers label that will list the type of spring and the proper maintenance procedures. Garage door lubricants are another option to help with proper maintenance of your system, but not all garage door lubricants are compatible with all types of springs, so you need to check your owners manual to determine what lubricant is appropriate. When choosing garage door lubricant make sure to use a water-based lubricant. A silicone-based lubricant is less recommended than a water-based lubricant because silicone is more dense, which allows for a better fit in the spring system.
When the garage door springs wear out, you can use garage door springs that have been replaced with ones that are of higher quality. However, it is always best to purchase new garage door springs from a reputable dealer since purchasing second hand ones can be dangerous. It is always a good idea to purchase your garage door springs from a garage door repair shop as well, as they may have the proper equipment and know how to properly replace them. It is always wise to have your garage door springs checked periodically to ensure that your family is safe and secure.